多項選擇題For what two purposes does the Ethernet protocol use physical addresses? ()

A.Network A - 172.16.3.48/26
B.Network A - 172.16.3.128/25
C.Network A - 172.16.3.192/26
D.Link A - 172.16.3.0/30
E.Link A - 172.16.3.40/30
F.Link A - 172.16.3.112/30


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題

What can be determined from the line of show ip route output shown in the exhibit?()

A.The next routing update can be expected in 35 seconds.
B.The IP address 10.10.10.6 is configured on S0/1.
C.The IP address 10.10.10.8 is configured on S0/1.
D.This route is using the default administrative distance.
E.The 10.10.10.8 network is two hops away from this router.

2.單項選擇題使配置的訪問列表應用到接口上的命令是什么?()

A.access-group
B.access-list
C.acl
D.firewall packet-filter xxxx inbound/outbound

3.多項選擇題Which destination addresses will be used by Host A to send data to Host C?()

A.the IP address of Switch 1
B.the MAC address of Switch 1
C.the IP address of Host C
D.the MAC address of Host C
E.the IP address of the router's E0 interface
F.the MAC address of the router's E0 interface

4.單項選擇題在一個接口配置x25 map ip 102.112.43.125 x121-address 12345命令,其中102.112.43.125和123456分別是()。

A.對端的IP地址和對端的x.121地址
B.對端的IP地址和本接口的x.121地址
C.本接口的IP地址和對端的x.121地址
D.本接口的IP地址和本接口的x.121地址

5.單項選擇題Why will as witch never learn a broadcast address?()

A.Broadcast frames are never sent to swiches.
B.Broadcast addresses use an incorrect format for the switching table.
C.A broadcast address will never be the source address of a frame.
D.Broadcasts only use network layer addressing.
E.A broadcast frame is never forwarded by a switch.

最新試題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()

題型:單項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。當計算機A 向計算機D 發送幀時,哪些計算機會接收該幀?()

題型:單項選擇題

要將數據包發送到遠程網絡,應使用哪種設備?()

題型:單項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題