Refer to the exhibit. What command sequence will enable PAT from the inside to outside network?()
A.(config) ip nat pool isp-net 1.2.4.2 netmask 255.255.255.0 overload
B.(config-if) ip nat outside overload
C.(config) ip nat inside source list 1 interface ethernet1 overload
D.(config-if) ip nat inside overload
您可能感興趣的試卷
你可能感興趣的試題
A.arpa
B.ansi
C.ietf
D.nonstandard
E.Q.933a
F.Cisco
A.display fr map-info(顯示映射表)
B.display fr pvc-info(PVC統計信息)
C.display fr lmi-info
D.display interface
Refer to the exhibit. What does the (*) represent in the output?()
A.Packet is destined for a local interface to the router.
B.Packet was translated, but no response was received from the distant device.
C.Packet was not translated, because no additional ports are available.
D.Packet was translated and fast switched to the destination.
A.This is a 10 Mb/s switch port
B.This is a 100 Mb/s switch port
C.This is an Ethernet port operating at half duplex
D.This is an Ethernet port operating at full duplex
E. This is a port on a network interface card in a PC
Refer to the exhibit. The user at Workstation B reports that Server A cannot be reacheD.What ispreventing Workstation B from reaching Server A?()
A.The IP address for Server A is a broadcast address.
B.The IP address for Workstation B is a subnet address.
C.The gateway for Workstation B is not on the same subnet.
D.The gateway for Server A is not on the same subnet.
最新試題
請參見圖示。一臺主機正使用NAT 連接到Internet。下列哪三項IP 地址可實現此連接?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。公司路由器由于故障被更換。更換路由器之后,Education 辦公室內的主機C 和D 能夠相互ping 通,但是無法訪問Accounts 辦公室內的主機。此問題的原因可能是什么?()
在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()