單項選擇題Which command enables RSTP on a switch?()

A.spanning-tree mode rapid-pvst
B.spanning-tree uplinkfast
C.spanning-tree backbonefast
D.spanning-tree mode mst


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題Why would a network administrator configure port security on a switch()。

A.to prevent unauthorized Telnet access to a switch port
B.to limit the number of Layer 2 broadcasts on a particular switch port
C.to prevent unauthorized hosts from accessing the LAN
D.to protect the IP and MAC address of the switch and associated ports
E.to block unauthorized access to the switch management interfaces over common TCP ports

2.單項選擇題Hosts on the same VLAN can communicate with each other but are unable to communicate with hosts on different VLANs. What is needed to allow communication between VLANs()。

A.a switch with a trunk link that is configured between the switches
B.a router with an IP address on the physical interface that is connected to the switch
C.a switch with an access link that is configured between the switches
D.a router with subinterfaces configured on the physical interface that is connected to the switch

3.單項選擇題There are no boot system commands in a router configuration in NVRAM.What is the fall back sequence that router will use to find an ios during reload?()

A.Flash,TFTPserver,ROM
B.Flash,NVRAM,ROM
C.ROM,NVRAM,TFTPserver
D.NVRAM,TFTPserver,ROM
E.TFTPserver,F(xiàn)lash,NVRAM

4.單項選擇題

根據下圖,Switch1剛剛完成重啟,并完成上電自檢。HostA發送它的第一個偵到HostC,交換機首先會對switching table做什么操作()

A.Switch1會添加192.168.23.4到switchingtable
B.Switch1添加192.168.23.12到switchingtable
C.Switch1添加000A 8A47.E612到switchingtable
D.Switch1添加000B DB95.2EE9到switchingtable

5.單項選擇題哪種擴頻技術是802.11B定義使用的?()

A.IR
B.DSSS
C.FHSS
D.DSSS and FHSS
E.IR,F(xiàn)HSS,and DSSS

最新試題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet??梢詾槁酚善鹘涌赟0/0/0分配下列哪一個IP 地址?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€(gè)廣播域?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()

題型:多項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()

題型:?jiǎn)雾?xiàng)選擇題

請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()

題型:?jiǎn)雾?xiàng)選擇題

在配置路由器時,網絡技術人員想要命名路由器。輸入hostname 命令后,技術人員會看到下列哪一項提示?()

題型:?jiǎn)雾?xiàng)選擇題

OSI 哪一層可提供有序的數據重構服務?()

題型:?jiǎn)雾?xiàng)選擇題