多項選擇題What are two reasons a network administrator would use CDP? ()

A.to verify the type of cable interconnecting two devices
B.to determine the status of network services on a remote device
C.to obtain VLAN information from directly connected switches
D.to verify Layer 2 connectivity between two devices when Layer 3 fails
E.to obtain the IP address of a connected device in order to telnet to the device
F.to determine the status of the routing protocols between directly connected routers


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題Which two locations can be configured as a source for the IOS image in the boot system command?()

A.RAM
B.NVRAM
C.flash memory
D.HTTP server
E.TFTP server
F.Telnet server

2.多項選擇題A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration? ()

A.A switch in the VTP client mode cannot update its local VLAN database.
B.A trunk link must be configured between the switches to forward VTP updates.
C.A switch in the VTP server mode can update a switch in the VTP transparent mode.
D.A switch in the VTP transparent mode will forward updates that it receives to other switches.
E.A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.
F.A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.

4.多項選擇題Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? ()

A.the amount of available ROM
B.the amount of available flash and RAM memory
C.the version of the bootstrap software present on the router
D.show version
E.show processes
F.show running-config

5.多項選擇題下列哪一項正確描述了運行的OSPF的路由器的進程標識符的作用?()

A.是一個本地的標識
B.是一個全局的標識.
C.為了標識OSPF數據庫中的唯一的實例
D.是一個可選的參數,只有多個OSPF進程在同一個路由器上運行時才需要
E.所有在同一個OSPF區域的路由器必須用同一個進程號,否則它們無法交換路由信息。

最新試題

PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()

題型:單項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()

題型:單項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()

題型:單項選擇題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()

題型:單項選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題