A.Switch1(config-if)# switchport port-security maximum 1
B.Switch1(config)# mac-address-table secure
C.Switch1(config)# access-list 10 permit ip host
D.Switch1(config-if)# switchport port-security violation shutdown
E.Switch1(config-if)# ip access-group 10
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit.Based on the exhibited routing table,how will packets from a host within the192.168.10.192/26 LAN be forwarded to 192.168.10.1?()
A.The router will forward packets from R3 to R2 to R1
B.The router will forward packets from R3 to R1
C.The router will forward packets from R3 to R1 to R2
D.The router will forward packets from R3 to R2 to R1 AND from R3 to R1
The access control list shown in the graphic has been applied to the Ethernet interface of router R1using the ip access-group 101 in command.Which of the following Telnet sessions will be blocked by this ACL?()
A.from host PC1 to host 5.1.1.10
B.from host PC1 to host 5.1.3.10
C.from host PC2 to host 5.1.2.10
D.from host PC2 to host 5.1.3.8
Refer to the exhibit.Which is the most efficient summarization that R1 can use to advertise its networks toR2?()
A.172.1.4.0/22
B.172.1.0.0/21
C.172.1.0.0/22
D.172.1.4.0/25 172.1.4.128/25 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24
E.172.1.4.0/24 172.1.5.0/24 172.1.6.0/24 172.1.7.0/24
A.It establishes a static route to the 172.16.3.0 network.
B.It establishes a static route to the 192.168.2.0 network.
C.It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
D.It configures the router to send any traffic for an unknown destination out the interface with the address 192.168.2.4.
E.It uses the default administrative distance.
F.It is a route that would be used last if other routes to the same destination exist.
A.It allows switches to read frame tags.
B.It allows ports to be assigned to VLANs automatically.
C.It maintains VLAN consistency across a switched network.
D.It allows frames from multiple VLANs to use a single interface.
E.It allows VLAN information to be automatically propagated throughout the switching environment.
最新試題
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。某用戶想要查看當前的配置。圖中所示為ipconfig/all 命令的輸出。從此輸出可以得到哪三項結論?()
請參見圖示。哪種邏輯拓?fù)涫菍?duì)圖示網絡的準確描述?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
OSI 哪一層可提供有序的數據重構服務?()
請參見圖示。主機A 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,路由器Y 的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為172.16.1.5而目的IP 地址為172.16.7.24的數據包。捕獲該幀時,它的源MAC 地址是什么?()