A.show command
B.debug command
C.configuration command
D.rommon command
您可能感興趣的試卷
你可能感興趣的試題
A.A successor route is used by EIGRP to forward traffic to a destination.
B.Successor routes are saved in the topology table to be used if the primary route fails.
C.Successor routes are flagged as "active" in the routing table.
D.A successor route may be backed up by a feasible successor route.
E.Successor routes are stored in the neighbor table following the discovery process.
A.A new switch has no VLANs configured.
B.Connectivity between VLANs requires a Layer 3 device.
C.VLANs typically decrease the number of collision domains.
D.Each VLAN uses a separate address space.
E.A switch maintains a separate bridging table for each VLAN.
F.VLANs cannot span multiple switches.
A.The IOS image will be ignored.
B.The router will prompt to enter initial configuration mode.
C.The router will boot to ROM.
D.Any configuration entries in NVRAM will be ignored.
E.The configuration in flash memory will be booted.
A.show frame-relay end-to-end
B.show frame-relay map
C.show frame-relay lmi
D.show frame-relay pvc
最新試題
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
傳輸層如何讓主機能同時針對不同應用程序維護多個通信流?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()
請參見圖示。哪種邏輯拓?fù)涫菍D示網絡的準確描述?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
何時必須使用clock rate 命令配置路由器串行接口?()
請參見圖示。從主機X 發出的到主機Y 的tracert 命令已成功。下列哪一項正確地反映了追蹤列表中顯示的中間網絡設備的順序?()
下列哪些是私有IP 地址的地址范圍?()
請參見圖示。網絡技術人員試圖確定主機A 的正確IP 地址配置。以下哪一項是主機A 的有效配置?()