A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250
您可能感興趣的試卷
你可能感興趣的試題
A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]
A.copier
B.microwave oven
C.toaster
D.cordless phone
E.IP phone
F.AM radio
A.R1 will forward the packet out all interfaces.
B.R1 will drop this packet because this it is not a valid IP address.
C.As R1 forwards the frame containing this packet, Sw-A will add 192.168.1.255 to its MAC table.
D.R1 will encapsulate the packet in a frame with a destination MAC address of FF-FF-FF-FF-FF-FF
E.As R1 forwards the frame containing this packet, Sw-A will forward it to the device assigned the IP address of 192.168.1.255.
A.Drop the data.
B.Send the data frames to the default gateway.
C.Create an ARP request to get a MAC address for the receiving host.
D.Send a TCP SYN and wait for the SYN ACK with the IP address of the receiving host.
Refer to the exhibit.The Lakside Company has the internetwork in the exhibit.The administrator would liketo reduce the size of routing table on the Central router.Which partial routing table entry in the Central routerepresents a route summary that represents the vlans in Phoenix but no additional subnets?()
A.10.0.0.0/22 is subnetted,1 subnets D 10.4.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
B.10.0.0.0/28 is subnetted,1 subnets D 10.2.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
C.10.0.0.0/22 is subnetted,1 subnets D 10.0.0.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
D.10.0.0.0/30 is subnetted,1 subnets D 10.2.2.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
E.10.0.0.0/28 is subnetted,1 subnets D 10.4.4.0[90/20514560] via 10.2.0.2,6w0d,serial0/1
F.10.0.0.0/30 is subnetted,1 subnets D 10.4.4.4[90/20514560] via 10.2.0.2,6w0d,serial0/1
最新試題
請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()
請參見圖示。主機A 和B 無法互相通信。此問題的原因是什么?()
請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()
請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()
請參見圖示。網絡技術人員使用圖中所示的連接將主機A 連接到路由器以創建初始配置。下列有關此連接的陳述中哪一項正確?()
以下哪兩種介質可提供高達1Gb/s 的帶寬?()
請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€(gè)邏輯地址范圍?()
請參見圖示。圖中所示路由表所屬的PC 已正確配置。IP 地址192.168.1.254屬于哪一個網絡設備或接口?()
請參見圖示。網絡中的主機A 正在向主機B 發送數據段。有關所交換的數據段的流量控制如圖所示。下列關于此通信的陳述,哪兩項是正確的?()
PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()