A.0.0.0.240
B.255.255.255.252
C.255.255.255.0
D.255.255.255.224
E.255.255.255.240
您可能感興趣的試卷
你可能感興趣的試題
A.IP address:192.168.20.14 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.9
B.IP address:192.168.20.254 Subnet Mask:255.255.255.0 Default Gateway:192.168.20.1
C.IP address:192.168.20.30 Subnet Mask:255.255.255.248 Default Gateway:192.168.20.25
D.IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.17
E.IP address:192.168.20.30 Subnet Mask:255.255.255.240 Default Gateway:192.168.20.25
A.telnet access does not require a password
B.nat
C.no broadcast
D.chanage of destination address in the ipv6 header
E.chanage of source address in the ipv6 header
F.autoconfiguration
A.telnet access does not require a password
B.nat
C.no broadcast
D.chanage of destination address in the ipv6 header
E.chanage of source address in the ipv6 header
F.autoconfiguration
A.Global addresses start with 2000::/3.
B.Link-local addresses start with FE00:/12.
C.Link-local addresses start with FF00::/10.
D.There is only one loopback address and it is ::1.
E.If a global address is assigned to an interface, then that is the only allowable address for the interface.
Refer to the diagram. All hosts have connectivity with one another. Which statements describe the addressing scheme that is in use in the network? ()
A.The subnet mask in use is 255.255.255.192.
B.The subnet mask in use is 255.255.255.128.
C.The IP address 172.16.1.25 can be assigned to hosts in VLAN1
D.The IP address 172.16.1.205 can be assigned to hosts in VLAN1
E.The LAN interface of the router is configured with one IP address.
F.The LAN interface of the router is configured with multiple IP addresses.
最新試題
What are two enhancements that OSPFv3 supports over OSPFv2? ()
Which statement describes the process ID that is used to run OSPF on a router ?()
What SNMP message alerts the manager to a condition on the network?()
Which is true about OSPF router-id?()
What is the default Syslog facility level?()
In GLBP, which router will respond to client ARP requests?()
What command instructs the device to timestamp Syslog debug messages in milliseconds?()
Which three features are added in SNMPv3 over SNMPv2? ()
Refer to the exhibit.If the router Cisco returns the given output and has not had its router ID set manually, what value will OSPF use as its router ID?()
What are two benefits of using a single OSPF area network design?()