A. two IP addresses， one for each supervisor
B. three IP addresses， one virtual IP and one physical IP for each supervisor
C. one IP address that is shared among supervisors
D. none—management 0 will use the IP address from the first SVI that is created
您可能感興趣的試卷
你可能感興趣的試題
A. Receive port： Enabled， Transmit port： Enabled
B. Receive port： Enabled， Transmit port： Desired
C. Receive port： Enabled， Transmit port： Disabled
D. Receive port： Disabled， Transmit port： Desired
E. Receive port： Desired， Transmit port： Desired
A. NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco.
B. The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness.
C. NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane.
D. The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch.
A. The module is powered up， and interfaces are in an "admin down" state.
B. The module is denied power， and a syslog message is generated.
C. The module is powered up， and interfaces are allocated to VDC0.
D. The module is powered up， and interfaces are allocated to VDC100.
A. Compatibility with third-party Fibre Channel switches
B. Faster throughput
C. Reduce domain IDs in a Fibre Channel environment
D. Support for increased number of VSANs
E. Support for SAN port channels
A. manage SNMPv3 security access to switches
B. save and copy configuration files and software images
C. configure VLANs and Ethernet port channels
D. manage 2148T FEX， 2232PP FEX， and 2248TP FEX
E. configure FCoE
最新試題
What interface is created when an FC Port Channel is created on a Cisco Unified Computing System？（）
In the event of a GSS failure in a GSS cluster， which is true？（）
What is the use of an "all configuration" backup in Cisco UCS？（）
Which of the following are supported in Cisco Global Site Selector？ （）
Which three statements are possible causes for the "fltAdaptorHostIfLink-down" fault in UCS Manager？ （）
What is required for Cisco UCS C-Series rack server integration with Cisco UCS Manager？（）
Refer to the exhibit. According to the equipment tab in Cisco UCS Manager， which is true？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
From the Cisco UCS CLI， how do you verify which uplink ports a blade server is using for its network connectivity？（）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）