A.Use the command ip nbar protocol-discovery to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.
B.Use the command match protocol rtp to allow identification of real-time audio and video traffic. Use thecommand ip nbar port-map to extend the NBAR functionality for well-known protocols to new port numbers.
C.Use the command match protocol to allow identification of stateful protocols. Use the command ip nbar port-map to attach the protocols to an interface.
D.Configure a traffic class. Configure a traffic policy. Attach the traffic policy to an interface.
E.Configure video streaming. Configure audio streaming. Attach the codec to an interface.
您可能感興趣的試卷
你可能感興趣的試題
A.5
B.15
C.25
D.35
E.45
F.55
A.Over leased lines，use the multilink ppp command to reduce latency and jitter，and to create Distributed Link Fragmentation and interleaving.
B.Use the service-policy command to attach a traffic flow to an interface on the router.
C.Use the ip rsvp bandwidth command to set a strict upper limit on the bandwidth NBAR uses，and toguarantee admission of any flows.
D.Use the policy-map command to define one or more QoS policies （such as shaping，policing，and so on） to apply to traffic defined by a class map.
E.Use the random-detect dscp command to modify the default minimum and maximum thresholds for the DSCP value.
F.Use the class-map command to define one or more traffic classes by specifying the criteria by which traffic is classified.
A.Implementing DiffServ involves the configuration of RSVP.
B.Implementing IntServ allows QoS to be performed by configuring only the ingress and egress devices.
C.Implementing IntServ involves the utilization of RSVP.
D.Traffic should be classified and marked by the core network devices.
E.Traffic should be classified and marked as close to the edge of the network as possible.
A.CAC provides guaranteed voice quality on a link.
B.CAC artificially limits the number of concurrent voice calls.
C.CAC is used to control the amount of bandwidth that is taken by a call on a link.
D.CAC prevents oversubscription of WAN resources that is caused by too much voice traffic.
E.CAC allows an unlimited number of voice calls while severely restricting，if necessary，other forms of traffic.
F.CAC solves voice congestion problems by using QoS to give priority to UDP traffic.
A.To support fault and policy reporting，the WLSE requires a Wireless Control System （WCS）.
B.When WLSE detects an AP failure，it automatically increases the power and cell coverage of nearbyAPs.
C.WLSE requires the 2700 location appliance to offer location tracking.
D.WLSE can locate rogue APs and automatically shut them down.
E.WLSE configuration is done using the command line interface （CLI） or a WEB based template.
最新試題
Which three benefits are realized by implementing Wireless LAN Solution Engine （WLSE）？（）
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
Which two statements about the Wi-Fi Multimedia （WMM） standard are true？（）
What are two ways to minimize the delay of VoIP packets that are traversing a network？ （）
Which two functions can be provided by an Integrated Services Router （ISR） in a VoIP network？（）
Which of the items stated is typically the most expensive method of improving QoS across WAN links？（）
Which two commands should be entered on a WLAN controller to remove any residual configuration？（）
The Cisco SDM will create a QoS policy that provides services to two types of traffic. Which two statements indicate the default QoS parameters that are created by SDM？（）
When Cisco SDM is used to generate QoS policy， various QoS classes will be created and assigned a percentage of the interface bandwidth. Which three statements indicate the default bandwidth values that are assigned by SDM for outgoing traffic on a WAN interface？ （）