A. The QoS policy assigns a system class to the outgoing traffic for a vNIC or vHBA.
B. Flow-control policies determine whether the uplink Ethernet ports in a Cisco UCS environment send and receive IEEE 802.3x pause frames when the send buffer for a port fills.
C. If no system class is configured as CoS 0， the Fibre Channel system class is used.
D. The user can configure QoS for these system classes： platinum， gold， silver， best effort， Fibre Channel.
E. When configuring a system class， the type of adapter in a server may limit the maximum MTU supported.
您可能感興趣的試卷
你可能感興趣的試題
A. boot policy and BIOS policy
B. disk scrub and boot policy
C. BIOS setting scrub， boot policy， and BIOS policy
D. disk scrub and BIOS setting scrub
A. name
B. best-effort
C. burst
D. rate
E. host control
A. logical configuration
B. all configuration
C. full state
D. system configuration
A. If disk scrub is enabled， all BIOS settings for the server are erased.
B. If disk scrub is enabled， all the data access on any local drives is destroyed.
C. If disk scrub is enabled， the LSI active RAID is destroyed but data is still preserved.
D. If disk scrub is disabled， all data on any local drives is preserved， including the local storage configuration.
E. If disk scrub is enabled， all data on any local drives is preserved， including the local storage configuration.
A. Power capping helps mainly in reducing data center footprint.
B. Power capping helps reduce data center cooling.
C. A single power cap group policy allows you to set power limits across multiple UCS domains.
D. You can have multiple power cap groups per UCS domain.
E. Each blade within a UCS 5108 chassis can belong to a separate power cap group.
最新試題
When will an "all configuration" backup be imported into the Cisco UCS Manager？（）
Given a Cisco Unified Computing System， which is a valid port type in end-host mode？（）
Your company wants Server 1/eth0 （vNIC 1） configured so that it always uses Fabric Interconnect A Port Channel 1 （Po1） when it communicates with anything outside of the Cisco UCS domain. However， if vNIC 1 fails over to Fabric Interconnect B using fabric failover， then vNIC 1 can any uplink port on Fabric Interconnect B. Which statements are true？ （）
Given the following output： san-port-channel 12 is up Hardware is Fibre Channel Port WWN is 24：0c：00：0d：ec：d3：5c：00 Admin port mode is NP， trunk mode is on Port mode is NP Port vsan is 1 Speed is 8 Gbps Member[1] ： fc2/3 Member[2] ： fc2/4 What does "Speed is 8 Gbps" indicate？（）
Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS？（）
When testing ICMP access to a functional load-balancing ACE VIP， it fails. What is the reason of this problem？ （）
What is the appliance port used to connect to in a Cisco Unified Computing System？（）
In a Cisco Unified Computing System， where are SAN port channels connected to？（）
From the Cisco UCS CLI， how do you verify which uplink ports a blade server is using for its network connectivity？（）
What is the purpose of this command in a Cisco Application Control Engine？（） switch/Admin# show np 1 me-stats "-F0 v"