A.Calls to the PSTN can be made via the use of FXO or T1/E1 trunk ports.
B.Calls to the PSTN can be made via FXS or T1/E1 trunk ports.
C.Analog and IP phones can be connected to the VoIP network via FXO or T1/E1 trunk ports.
D.Calls between analog phones that are attached to the FXS ports in a VoIP network can be completely processed by voice-enabled routers.
您可能感興趣的試卷
你可能感興趣的試題
A.The FXS interface allows an analog connection to be directed at the public switched telephone network （PSTN’s） central office.
B.The FXS interface connects directly to a standard telephone，fax machine，or similar device and supplies ring，voltage，and dial tone.
C.The FXS interface connects directly to an IP phone and supplies ring，voltage，and dial tone.
D.The FXS interface connects directly to ISDN voice channels.
A.Standard encoding techniques create an uncompressed digital data rate of 4000 bps.
B.Standard encoding techniques create an uncompressed digital data rate of 8000 bps.
C.Standard encoding techniques create an uncompressed digital data rate of 64，000 bps.
D.Voice quality is not a concern if compression is not used.
E.Two methods of quantization are linear and logarithmic.
F.Two methods of compression are u-law and a-law.
A.The three required steps in the analog to digital conversion are sampling，encoding，and compression.
B.The three required steps in the analog to digital conversion are sampling，quantization，and compression.
C.The three required steps in the analog to digital conversion are sampling，quantization，and encoding.
D.The output of the sampling process is a pulse code modulation （PCM） signal.
E.The output of the sampling process is a pulse amplitude modulation （PAM） signal.
A.Cisco AutoQoS can be used repeatedly to apply a single QoS policy to multiple interfaces.
B.Cisco AutoQoS includes an optional web-based GUI for automating the configuration of QoS services.
C.Cisco AutoQoS provides capabilities to automate VoIP deployments.
D.The auto qos global configuration command is used to configure Cisco AutoQoS.
E.The Modular QoS CLI （MQC） is the best way to fine tune QoS configurations.
F.The SDM QoS wizard is the fastest way to implement QoS.
A.DiffServ requires RSVP to set up a path through the network to accommodate the requested QoS.
B.Network traffic is identified by class， and the level of service is chosen for each class.
C.The DiffServ model relies on a fairly simple mechanism to provide QoS over a wide range of equipment.
D.RSVP enables the DiffServ model to provide end-to-end QoS.
E.The DiffServ model is more scalable than the IntServ model.
F.The flow-based approach of the DiffServ model is ideal for large scalable implementations such as the public Internet.
最新試題
Which Control Plane Policing （CoPP） statement is true？（）
Which three functions are associated with a Cisco Unified CallManager？ （）
When deploying a Cisco Wireless Control System （WCS） with the 2700 series location appliance， to within what range is on-demand location of rogue APs possible？（）
What are the three models of quality of service （QoS） in a network？（）
Which two commands should be entered on a WLAN controller to remove any residual configuration？（）
Which set of classes correctly identifies the four traffic classes， from highest priority to lowest priority， specified in the 802.11e standard？（）
What are three factors used to determine the amount of bandwidth that is required for a single VoIP call？ （）
Which two QoS classification and marking statements are true？ （）
SDM creates a low latency queuing （LLQ） service policy with its associated classes. What are the two types of low latency queuing available using the SDM QoS wizard？（）
Which three user interfaces exist for the Cisco WLAN Controllers？（）