Part of the routing table of router PG1 is displayed below:
From analyzing the above command output,what is the administrative distance of the external EIGRP routes()
A.24
B.32
C.90
D.170
E.27316
F.None of the other alternatives apply
您可能感興趣的試卷
你可能感興趣的試題
A.The neighboring router stops receiving ACK packets from this router.
B.The neighboring router starts receiving route updates from this router.
C.The neighboring router is too busy to answer the query(generally caused by high CPU utilization).
D.The neighboring router is having memory problems and cannot allocate the memory to process the query or build the reply packet.
A.Lay er 5
B.Lay er 4
C.Lay er 3
D.Lay er 2
E.Lay er 1
A.The Aironet Desktop Utility (ADU )profile manager feature can create and manage only one profile for the wireless client adapter.
B.The Aironet Desktop Utility (ADU) can support only one wireless client adapter installed and used at a time.
C.The Aironet Desktop Utility (ADU) can be used to establish the association between the client adapter and the access point , manage authentication to the wireless network , and enable encryption.
D.The Aironet Desktop Utility (ADU) and the Microsoft Wireless Configuration Manager can be used at the same time to configure the wireless client adapter.
The network setup for this trouble ticket is shown in Figure 3.
Trouble Ticket Statement
DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting showsand R2 is not an OSPFv3 neighbor on R3.
Configurationon R2
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 2.2.2.2!
interface s0/0/0/0.23
ipv6 address 2026::1:1/122
ConfigurationR3
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 3.3.3.3!
interface s0/0/0/0.23
ipv6 address 2026::1:2/122
ipv6 ospf 6 area 0
Figure 3
What is the solution of the fault condition?()
A.Add ipv6 ospf 6 area 0 under S0/0/0/0.23 on R2
B.Add ipv6 ospf 6 area 6 under s0/0/0/0.23 on R2
C.Remove IPv6 address from s0/0/0/0.23 on R2
D.Enable IPv6 routing on s0/0/0/0.23 on R2
The network setup for this trouble ticket is shown in Figure 3.
Trouble Ticket Statement
DSW1 and R4 cannot ping R2’s loopback or R2’s s0/0/0/0.12 IPv6 address. Initial troubleshooting shows and R2 is not an OSPFv3 neighbor on R3.
Configurationon R2
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 2.2.2.2!
interface s0/0/0/0.23
ipv6 address 2026::1:1/122
ConfigurationR3
ipv6 unicast-routing!
ipv6 router ospf 6
router-id 3.3.3.3!
interface s0/0/0/0.23
ipv6 address 2026::1:2/122
ipv6 ospf 6 area 0
Figure 3
The Fault Condition is related to which technology?()
A.IPv6 Addressing
B.Route Redistribution
C.OSPFv3
D.RIPng
最新試題
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec, which two parameters are required when defining the tunnel interfaceinformation?()
In computer security, AAA stands for authentication, authorization and accounting. Which optionabout the AAA authentication enable default group radius enable command is correct?()
Drag and drop each management protocol on the above to the correct category on the below.
Which statement about PPPoA configuration is correct?()
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
Network Topology Exhibit:Configuration Exhibit:NET(config)# access-list 112 deny icmp any any echo logNET(config)# access-list 112 deny imp any any redirect logNET(config)# access-list 112 deny icmp any any mask-request logNET(config)# access-list 112 permit icmp any 10.1.1.0 0.0.0.255NET(config)# interface Fa0/1NET(config-if)# ip access-group 112 inYou work as a network administrator at networkTut.com, study the exhibit carefully. Theconfiguration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However, the configurationis incorrect. On the basis of the information in the exhibit, which configuration option wouldcorrectly configure router NET?()
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
Which statement correctly describes IPsec VPN backup technology?()
Drag the DSL local loop topic on the left to the correct descriptions on the right.
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true?()