A.PPPoE with the 827 configured as a bridge
B.PPPoE with the 827 configured as the PPPoE client
C.PPPoA
D.RFC 1483 Bridged with the 827 configured as the PPPoE client
E.RFC 1482 Bridged with the 827 configured as a bridge
您可能感興趣的試卷
你可能感興趣的試題
A.The IP inspection rule can be applied in the inbound direction on the secured interface
B.The IP inspection rule can be applied in the outbound direction on the unsecured interface
C.The ACL applied in the inbound direction on the unsecured interface should be an extendedACL.
D.For temporary openings to be created dynamically by Cisco IOS Firewall， the access-list for thereturning traffic must be a standard ACL
Study this exhibit carefully. What information can be derived from the SDM firewall configurationdisplayed？（）
A.Access-list 101 was configured for the trusted interface， and access-list 100 was configured forthe untrusted interface
B.Access-list 100 was configured for the trusted interface， and access-list 101 was configured forthe untrusted interface
C.Access-list 100 was configured for the inbound direction， and access-list 101 was configured forthe outbound direction on the trusted interface
D.Access-list 100 was configured for the inbound direction， and access-list 101 was configured forthe outbound direction on the untrusted interface
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.
Which IPSec rule is used for the Olympia branch and what does it define？（）
A.102
B.116
C.127
D.IP traffic sourced from 10.10.10.0/24 destined to 10.5.15.0/24 will use the VPN
E.IP traffic sourced from 10.10.10.0/24 destined to 10.8.28.0/24 will use the VPN
F.IP traffic sourced from 10.10.10.0/24 destined to 10.5.33.0/24 will use the VPN
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.
To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.
Which defined peer IP address an local subnet belong to Crete？（）
A.peer address 192.168.55.159
B.peer address 192.168.89.192
C.peer address 192.168.195.23
D.subnet 10.5.15.0/24
E.subnet 10.7.23.0/24
F.subnet 10.4.38.0/24
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.
Which algorithm as defined by the transform set is used for providing data confidentiality whenconnected to Tyre？（）
A.ESP-3DES-SHA
B.ESP-3DES-SHA1
C.ESP-3DES-SHA2
D.ESP-3DES
E.ESP-SHA-HMAC
最新試題
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
Drag and drop the xDSL type on the above to the appropriate xDSL description on the below.
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
Which three statements accurately describe IOS Firewall configurations？（）
Which statement about PPPoA configuration is correct？（）
Drag the IOS commands from the left that would be used to implement a GRE tunnel using the10.1.1.0.30 network on interface serial 0/0 to the correct target area on the right.