A.Multicast addresses 224.0.0.13 and 224.0.0.22 are reserved link - local addresses used by PIMv2 and IGMPv3
B.Because they would map to overlapping IP multicast MAC addresses, multicast addresses 224.0.1.1 and 238.1.1.1 could not be used toget her
C.Multicast addresses 224.0.0.0 through 224.0.0.255 are always forwarded because they are transmitted with Time to Live (TTL) greater than 1
D.Multicast addresses 224.0.0.5 and 224.0.0.6 are source multicast addresses for OSPF routers
E.The a dministratively scoped multicast addresses 239.0.0.0 through 239.255.255.255 are similar in purpose to RFC 1918 private unicast addresses
F.Multicast address 224.0.1.1 has been reserved for the Network Time Protocol (NTP) by the IANA
您可能感興趣的試卷
你可能感興趣的試題
A. The area cannot be a backbone area.
B. Inter area routes are suppressed.
C. The area has no more than 10 routers.
D. No virtual links are allowed.
E. No autonomous system border routers are allowed.
F. Redistribution is not allowed unless the packet is changed to a type 7 packet.
Refer to the exhibit. Which three statements accurately describe the result of applying the exhibited route map?（）
A. The map prohibits th e redistribution of all type 2 external OSPF routes.
B. All routes that do no match clauses 10 and 20 of the route map are redistributed with their tags set to 8.
C. The map prohibits the redistribution of all external OSPF routes with tag 6 set.
D. Th e map permits the redistribution of all type 1 external OSPF routes.
E. The map redistributes into EIGRP all routes that match the pfx prefix list and the five metric values?0000, 1000, 255, 1, and 1500.
F. The map prohibits the redistribution of all ty pe 2 external OSPF routes with tag 6 set.
A. 20
B. 10
C. 0
D. 1
Refer to the exhibit. Which statement is true? （）
A. Only traffic with a destination from 10.10.0.0/19 will be permitted.
B. Router RAR1 will accept only route 10.10.0.0/19 from its BGP neighbor.
C. Only traffic going to 10.10.0.0/19 will be permitted.
D. Router RAR1 will send only route 10.10.0.0/19 to its BGP neighbor.
Refer to the exhibit. What statement is true base d upon the configuration in the exhibit? （）
A. CGMP version 2 is being used.
B. The switch will use sparse mode first, dense mode second.
C. A rendezvous point must be configured in order for the interface to operate in sparse mode.
D. IGMP version 2 is being used.
E. The rendezvous point is IP address 172.16.4.16.
F. If a rendezvous point is configured, the interface cannot operate in dense mode.
最新試題
Router R1 sits at an Enterprise branch office, using both the Internet and a leased line to another Enterprise router for its two connectivity options back into the rest of the Enterprise network. The engineer planning for this branch decided to use the leased line for all Enterprise traffic, unless it fails, in which case the Internet connection should be used to pass traffic to the Enterprise.Which of the following is most likely to be useful on the branch router?（）
Router R1 has the following configuration. Assuming R1's F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?（）interface f0/0ipv6 address 2345:0:0:8::1/64
Router R1 lists the following output from a show command. Which of the following is true about R1?（）R1# show ip v6 interface f0/0FastEthernet0/0 is up, line protocol is upIPv6 is enabled, link - local address is FE80::213:19FF:FE12:3456No Virtual link - local address(es):Global unicast address(es):2000::4:213:19FF:FE12:3456, subnet is 2000:0:0:4::/64 [EUI]Jo ined group address(es):FF02::1FF02::2FF02::1:FF:12:3456
Router R1, a branch router, connects to the Internet using DSL. The engineer plans to use a configuration with a dialer interface. The answers list a feature and interface on which the feature could be configured.Which combinations accurately describe the interface under which a feature will be configured?（）
An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?（）
A client host uses IPv4 to communicate with one ser ver and IPv6 to communicate with another.Which of the following IPv6 coexistence features is likely at work on the host?（）
Which of the following must match for two directly connected routers running OSPF to establish a neighbor adjacency?（）
Which of the following answers lists a multicast IPv6 address?（）
Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exis ts in a planning document intended to be used to copy/paste into Router R1 to enable EIGRP for IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Assuming F0/0 and S0/0/0 reach an up/up state, which of the following is true about EIGRP for IPv6 on R1 after this configuration has been pasted into R1?（）ipv6 router eigrp 1ipv6 unicast- routinginterface f0/0ipv6 address 2000::1/64ipv6 eigrp 1interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 eigrp 1
Router R1 has two LAN interfaces and three serial interfaces enabled for IPv6. All the inte rfaces use link local addresses automatically generated by the router.Which of the following could be the link local address of R1's interface S0/0?（）