You have very few cisco 7920 wireless ip phones on your network， but lots of wireless laptops. You want to increase the bandwidth available for the laptops by decreasing the bandwidth
reserved for the cisco 7920 phones.
What is the lowest percentage of voice-allocated bandwidth you can select on the wlan controller？（）
A.55 percent
B.75 percent
C.40 percent
D.25 percent
您可能感興趣的試卷
你可能感興趣的試題
A.windows 2000 sp4
B.windows server 2003
C.solaris 10
D.vista
E.windows xp pro
Your customer has deployed a cisco wireless location appliance within its warehouse
environment. however， employees there have been experiencing problems when tracking objects using active rfid tags. you use an access point scan to determine if the location appliance has been deployed correctly.
Making which change to warehouse deployment location services will most likely correct the problem？（）
A.ensure channels are deployed such that they do not overlap
B.allow for the automatic containment of rogue access points
C.ensure each area is covered by a minimum of three access points
D.ensure a minimum rssi value of -50
A.4
B.32
C.8
D.16
A cisco 4404 wlan controller is being connected to a cisco 6500 catalyst series switch.
How would you interconnect and configure lag for connectivity and ensure redundancy？（）
A.all four ports from the cisco wlc terminated to the same catalyst gigabit module and channel group.
B.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 10 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 10.
C.all four ports from the cisco wlc terminated to the same catalyst gigabit module using two channel groups.
D.ports 1 and 2 from cisco wlc to catalyst gigabit module slot 1 channel group 20 and cisco wlc ports 3 and 4 to catalyst gigabit module slot 2 channel group 40.
A.50 feet [15 meters]
B.200 feet [60 meters]
C.150 feet [45 meters]
D.100 feet [30 meters]
最新試題
You are configuring a wireless LAN controller for QoS.Which 802.11e user priority tag should you apply to voice applications？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware.Before you press and hold the MODEbutton， you should verify that the file name is which of the following？（）
You are trying to change the polling parameters used by the location manager via the Cisco WCS，and your request is being denied. What is wrong？（）
Static WEP is configured on the access point. You are authenticated and associated to the accesspoint but are unable to obtain an IP address.Which of the following will cause this problem？（）
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on.Which situation would result in thistype of problem？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port？（）
You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference？（）
You review the Failed Attempts logs on an AAA server and find： "unknown network access servererror." Which failure could produce this error？（）