單項選擇題Which statement is correct for the LWAPP/CAPWAP AP upstream encapsulated frame for a WMM-associated client frame that is centrally switched running v5.2?()

A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題What are two design considerations for a WLAN to support voice?()

A.Packet loss is less than one percent.
B.Signal strength at cell edge is approximately -67 dBm.
C.End-to-end delay is less than 200 ms.
D.Cell overlap between APs is 50 percent.

2.多項選擇題Which three call information items does AirMagnet VoFi Analyzer provide?()

A.the codec used by the calling phone
B.approximate length of the call in minutes
C.MOS values throughout the duration of the call
D.802.11e access category overruns
E.co-channel interference percentage during the call

3.單項選擇題Which statement correctly describes a wireless client Layer 2 roam from AP1 to AP2 while joined to a multicast stream using Cisco WLC running v5.2?()

A.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC after AP1 issues an IGMP query.
B.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from  Cisco WLC independent of AP1 multicast member status.
C.Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  provided that another client has  already joined that multicast.
D.Client resumes multicast after association with AP2,  because multicast information is sent in mobility  exchanges and AP2 is already a member of the multicast group,  regardless if any other clients have  already joined that multicast.

4.單項選擇題If the VoWLAN client is a Vocera badge, which Cisco WLC parameter needs to be changed from the default value?()

A.DTIM
B.Ethernet multicast mode
C.peer-to-peer block mode
D.RF group mode
E.DTPC

最新試題

Which configuration is required for a Vocera badge to function properly on a Cisco WLC?()

題型:單項選擇題

What is the WMM user priority of the packets going downstream to the client when the client does not support TSPEC but the Cisco WLC has ACM enabled and WLAN priority is set to Platinum?()

題型:單項選擇題

What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?()

題型:單項選擇題

Which configuration should be done in order to improve the performance of the Cisco Unified Wireless IP Phone 7921G in a WLAN infrastructure?()

題型:單項選擇題

Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?()

題型:單項選擇題

Which wireless LAN statistics are reported from the Cisco Unified Wireless IP Phone 7921G via a directly connected web browser?()

題型:單項選擇題

Which statement is correct for both the LWAPP and CAPWAP AP upstream 802.1Q tagged wired QoS priority for a WMM-associated client frame that is H-REAP locally switched running v5.2?()

題型:單項選擇題

How do Cisco Unified Communications IP phones receive firmware upgrades?()

題型:單項選擇題

When using simultaneous voice and multicast on a single WLAN and RF band, what is the recommended DTIM value of the WLAN for VoWLAN devices?()

題型:單項選擇題

When designing the coverage area for high call capacity, what two actions should be done with data rates and channels?()

題型:多項選擇題