單項選擇題In a network using Cisco autonomous access points running WDS, what port is used for authentication by the local authentication service on an access point?()

A.1813
B.1645
C.1646
D.1812


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題When conducting an Assisted Site Survey, the WLSE does which of the following during the Radio Scan process?()

A.chooses the least congested channel
B.uses the configured channel
C.sets all access points to the same channel
D.steps through each of the allowed channels

2.單項選擇題To implement the optional phase zero when using EAP-FAST for authentication, which of the following parameters must be set on the Cisco Secure ACS?()

A.EAP-FAST master server
B.Allow automatic PAC provisioning
C.client initial message
D.authority ID info

3.單項選擇題On a Cisco Aironet 1230 Series autonomous access point, the Status LED is solid red, and the Ethernet and Radio LEDs are both off. What does this indicate?()

A.A firmware upgrade is in progress.
B.The internal radio has failed.
C.An access point buffer overflow is occurring.
D.The access point is booting.

4.單項選擇題

On a Cisco Aironet 1130 Series autonomous access point, the status indicator is blinking dark blue.
What does this indicate?()

A.The access point is booting.
B.A firmware upgrade is in progress.
C.The internal radio has failed.
D.An access point buffer overflow is occurring.

最新試題

You are installing a Cisco 4402 Series Wireless LAN Controller.What type of interface is used on the uplink port?()

題型:單項選擇題

You have a very few Cisco 7920 wireless IP phones on your network, but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller?()

題型:單項選擇題

You have been called upon to add location-based services into an existing controller-basedwireless design which primarily encompasses handheld devices such as barcode scanners and Cisco7920 wireless IP phones.In which mode should you deploy the additional access points to achievethe density required without excessive co-channel interference?()

題型:單項選擇題

If it is properly deployed, a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller?()

題型:單項選擇題

You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is, you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to?()

題型:單項選擇題

You are installing a Cisco Aironet 1000 Series controller-based access point. When you boot it, allthe LEDs on the access point blink together.What does this indicate about the access point?()

題型:單項選擇題

Which of the following parameter sets must be configured on the Cisco Wireless Location Appliance?()

題型:單項選擇題

You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem?()

題型:單項選擇題

The IOS of a North American Cisco Aironet 1130AG Series standalone access point has becomecorrupt. You must therefore reload the TFTP firmware.Before you press and hold the MODEbutton, you should verify that the file name is which of the following?()

題型:單項選擇題

On a WLAN controller, what is the default roaming bandwidth percentage reserved for voice clients?()

題型:單項選擇題