A.Move bodily to port
B.Move bodily to starboard
C.Move in a zig-zag motion
D.Steer a fairly straight course
您可能感興趣的試卷
你可能感興趣的試題
A.Abreast the heel
B.At right angles to the boom when viewed from above
C.Aft of the heel
D.Forward of the spiderband
A.Effect of the propeller flow on the rudders
B.Water flow due to the vessel's movement through the water
C.Tunnel affect of the water flow past opposing rudders
D.Discharge current being channeled to impinge on the vessel's deadwood
A.wooden blocks or dunnage placed between a deck load and the deck
B.the chains and shackles used to secure a deck cargo
C.a crate in which a deck cargo is packaged
D.cardboard separation pieces placed between deck loads to prevent chafing
A.one
B.two
C.three
D.four
A.Right-hand laid
B.Cable-laid
C.Sennet-laid
D.Water-laid
最新試題
Which of the following statements concerning the rigging of bosuns’ chairs and their use is TRUE（）.
In a twin screw ship going half-ahead，both screws turning outboard and the rudder amidships，no current or wind，the vessel will（）.
An intermediate spring is（）.
In the manufacture of wire rope，if the wires are shaped to conform to the curvature of the finished rope before they are laid up，the rope is called（）.
The Vessel is a（）bulk carrier which is permitted to carry grain in bulk without requiring any fittings under the Rules of the 1974 International Safety of Life at Sea Convention.
Serving is（）.
The size of wire rope is determined by the（）.
Safety goggles or glasses are NOT normally worn when（）.
The maximum number of passengers a Vessel may carry（）.
You are preparing to lubricate standing rigging on your vessel．When rigging a bosun’s chair on a stay with a shackle，（）.