A.after torque causes line pull to exceed the rated capacity of the winch
B.before the line pull reaches the rated capacity of the winch
C.when the line pull reaches the breaking strength of the fall
D.before the safe working load of the fall is reached
您可能感興趣的試卷
你可能感興趣的試題
A.install shoring so the shoring supports the damaged bulkheads without pushing on them
B.install shoring so that it pushes on the damaged bulkhead while supporting it
C.use jacks or chain falls to remove the set before installing shores
D.place sandbags by the bulkhead without installing shores
A.triangular-shaped plates connecting the bull chain to the topping lift
B.metal plates secured over the tops of the hawsepipes
C.faired shell plates with curvature in two directions
D.sheets of dunnage used to prevent heavy cargo from buckling the deck plates
A.assist in drydock alignment
B.improve the vessel's stability
C.protect the vessel from slamming against piers
D.reduce the rolling of the vessel
A.deeply-grooved drum on the windlass with sprockets which engage the links of the anchor chain
B.winch that is running out of control due to a failure of the overspeed trips
C.line that has jumped off the gypsyhead while under strain
D.nylon line that parts under strain and whips back in a hazardous manner
A.blind flange
B.pivot coupling
C.quick-release coupling
D.spectacle flange
最新試題
Ship’s steering gear refers to().
Grinding to eliminate shallow surface defects should be done().
The joint of the riser in a marine riser system that compensates for heave,the up-and-down motion of a floater,is the().
Buckler plates are().
The strake on each side of the keel is called a().
A single fitting installed in a pipeline that either blanks off the pipe or allows a full flow passage of a liquid through the pipe is referred to as a().
The riding pawl is().
The machinery associated with heaving in and running out anchor chain is the().
The opening in the deck beneath the anchor windlass that leads to the chain locker is the().
Electric cargo winches have an overload safety device which normally cuts the current to the winch motor().