A.insure that the hawser leads directly aft as it passes over the stern of the towing vessel
B.increase the stability of the towing vessel by raising the hawser off the deck
C.reduce chafing of the towing hawser
D.prevent fouling of the hawser on deck gear located on the stern of the towing vessel
您可能感興趣的試卷
你可能感興趣的試題
A.increase the righting moment
B.cause an increase in the righting arm
C.bring the vessel to an upright equilibrium position
D.cause the vessel to flop to a greater angle
A.contaminating food with extinguishing agent
B.spreading through the engineering space
C.loss of stability
D.a grease fire in the ventilation system
A.the vessel must be moored snugly
B.each tank must be partially full to show it does not leak
C.all dunnage,tools,and extraneous items are secured
D.water under vessel must be deep enough to prevent grounding
A.which exists when the wind speed is less than 50 knots
B.before collision
C.after flooding
D.at the maximum load
A.The righting arms at various angles of inclination and displacement
B.The metacentric height at large angles of heel
C.The height of the center of buoyancy at various angles
D.The metacentric radius at various displacements
最新試題
If the cause of a sudden severe list is negative initial stability,counterflooding into empty tanks may().
The trim and stability booklet must be approved by the().
Initial stability refers to stability().
What is used as an indicator of initial stability? ()
Stability is determined principally by the location of the point of application of two forces: the downward-acting gravity force and the().
Initial stability of a vessel may be improved by().
Stability is determined principally by the location of the center of gravity and the().
To prevent loss of stability from free communication flooding you should().
The vertical distance between G and M is used as a measure of().
Damage stability is the stability().