A.should be coiled in a clockwise direction
B.should be coiled in a counterclockwise direction
C.may be coiled either clockwise or counterclockwise
D.should never be coiled
您可能感興趣的試卷
你可能感興趣的試題
A.the engineers,from a panel in the engine room
B.shutting off the current to the winch
C.pushing the switch lever arm while the winch is running
D.All of the above
A.increasing the shaft RPM prior to release
B.using a pelican hook for quick release
C.using preventers
D.using a short chain for the lead through the stern chock
A.5 times the depth of the water in good holding ground
B.10 times the depth of the water in shallow water
C.2 times the depth of the water in poor holding ground
D.8 times the depth of the water in deep water
A.coil it counterclockwise
B.not coil it
C.take a turn under
D.twist out the kinks under a strain
A.when the line pull reaches the rated winch capacity
B.after the line pull exceeds the rated winch capacity
C.after a short build-up of torque
D.immediately
最新試題
If an attempt is made to hoist a load that exceeds the capacity of an electric winch,an overload safety device causes a circuit breaker to cut off the current to the winch motor().
A stopper used in securing the ground tackle for sea that consists of a grab attached to a turnbuckle is a().
The size of wire rope is determined by the().
If kinking results while wire rope is being coiled clockwise,you should().
After deploying the anchor,a permanent chain chaser is().
An anchor winch should be equipped with mechanical brakes capable of holding().
The square knot is used for().
At the instant when a string of casing being run from a ship is landed in the well head,().
Limit switches on gravity davits should be tested by().
Chafing gear is used to().