A.for the saving of life
B.for fire-fighting
C.for mooring purpose
D.for towing purpose
您可能感興趣的試卷
你可能感興趣的試題
A.on the lee side
B.on the windward side
C.with the wind dead ahead
D.with the wind from astern
A.eliminate all water entering the hole
B.only plug holes in machinery or other vital spaces
C.reduce the entry of water as much as possible
D.plug the largest holes first
A.fuel
B.oxygen
C.ignition
D.All of the above
A.portable ventilation system
B.flame safety lamp
C.self-contained breathing apparatus
D.gas mask
A.fever and thirst
B.nausea and dizziness
C.stomach cramps and diarrhea
D.reddening of skin and hives
A.cold and moist skin，high body temperature
B.cold and dry skin，low body temperature
C.hot and moist skin，high body temperature
D.hot and dry skin，high body temperature
A.vomiting
B.blue color and lack of breathing
C.irregular breathing
D.unconsciousness
A.the top 2-1/2 inches of each side
B.the releasing gear lever
C.the fuel tanks
D.the thwarts
A.surfaced with a nonskid texture
B.roped off to prevent unnecessary access
C.kept clear of any obstructions that would interfere with launching
D.posted with a list of persons assigned to the lifeboat
A.Small sips at regular intervals during the day
B.The complete daily ration at one time during the day
C.One-third the daily ration three times daily
D.Small sips only after sunset
最新試題
The MOST important element in administering CPR is（）.
On a lifeboat equipped with Rottmer-type releasing gear，turning the releasing lever releases（）.
If the survival craft is not loaded to full capacity，the personnel should be（）.
In painting a lifeboat following its overhaul，which parts must be painted bright red?（）
The MINIMUM acceptable size for a towing bridle would be that size in which the safe working load (SWL) of each leg of the bridle is equal to（）.
Number 3 lifeboat would be（）.
The depth over a shallow patch，（）about 1．5 miles southeastward of Nanshan Tou lighthouse，reduces to 8 meters.
The grab rail of a metal lifeboat is normally located（）.
Symptoms of heat stroke are（）.
In order for combustion to occur inside a piping system such as a vapor collection header in a marine emmission control system，there must be（）.