多項選擇題What are the two results of this configuration? ()

A.The default route should have a next hop address of 64.100.0.3.
B.Hosts on the LAN that is connected to FastEthernet 0/1 are using public IP addressing.
C.The address of the subnet segment with the WWW server will support seven more servers.
D.The addressing scheme allows users on the Internet to access the WWW server.
E.Hosts on the LAN that is connected to FastEthernet 0/1 will not be able to access the Internet without address translation.


您可能感興趣的試卷

你可能感興趣的試題

1.多項選擇題What are two reasons a network administrator would use CDP? ()

A.to verify the type of cable interconnecting two devices
B.to determine the status of network services on a remote device
C.to obtain VLAN information from directly connected switches
D.to verify Layer 2 connectivity between two devices when Layer 3 fails
E.to obtain the IP address of a connected device in order to telnet to the device
F.to determine the status of the routing protocols between directly connected routers

2.多項選擇題Which two locations can be configured as a source for the IOS image in the boot system command?()

A.RAM
B.NVRAM
C.flash memory
D.HTTP server
E.TFTP server
F.Telnet server

3.多項選擇題A network administrator is explaining VTP configuration to a new technician. What should the network administrator tell the new technician about VTP configuration? ()

A.A switch in the VTP client mode cannot update its local VLAN database.
B.A trunk link must be configured between the switches to forward VTP updates.
C.A switch in the VTP server mode can update a switch in the VTP transparent mode.
D.A switch in the VTP transparent mode will forward updates that it receives to other switches.
E.A switch in the VTP server mode only updates switches in the VTP client mode that have a higher VTP revision number.
F.A switch in the VTP server mode will update switches in the VTP client mode regardless of the configured VTP domain membership.

5.多項選擇題Before installing a new, upgraded version of the IOS, what should be checked on the router, and which command should be used to gather this information? ()

A.the amount of available ROM
B.the amount of available flash and RAM memory
C.the version of the bootstrap software present on the router
D.show version
E.show processes
F.show running-config

最新試題

在路由器上使用Router#copy running-config startup-config 命令會產生什么效果?()

題型:單項選擇題

請參見圖示。對于從主機A 向Web 服務器發出的網頁請求,正確的目的套接字?jǐn)?shù)字是什么?()

題型:單項選擇題

PC 無法連接到任何遠程網站,無法ping 通其默認網關,也無法ping 通本地網段中工作正常的打印機。以下哪項操作可以確認此PC 上的TCP/IP 協議棧是否工作正常?()

題型:單項選擇題

請參見圖示。下列哪組設備僅包含中間設備?()

題型:單項選擇題

何時必須使用clock rate 命令配置路由器串行接口?()

題型:單項選擇題

請參見圖示。已啟用路由器的NAT 功能供PC 訪問Internet。可以為路由器接口S0/0/0分配下列哪一個IP 地址?()

題型:單項選擇題

下列哪些是私有IP 地址的地址范圍?()

題型:多項選擇題

請參見圖示。電纜1和電纜2分別按照特定的物理層要求接線。哪三個網段使用電纜2?()

題型:多項選擇題

OSI 模型的哪兩項功能在第2層實現?()

題型:多項選擇題

在Cisco IOS 設備中,啟動配置文件存儲于何處?()

題型:單項選擇題