多項選擇題Which two of these statements are true of IPv6 address representation? ()

A.There are four types of IPv6 addresses: unicast, multicast, anycast, and broadcast.
B.A single interface may be assigned multiple IPv6 addresses of any type.
C.Every IPv6 interface contains at least one loopback address.
D.The first 64 bits represent the dynamically created interface ID.
E.Leading zeros in an IPv6 16 bit hexadecimal field are mandatory.


您可能感興趣的試卷

你可能感興趣的試題

3.多項選擇題Which two statements describe characteristics of IPv6 unicast addressing?()

A.Global addresses start with 2000::/3.
B.Link-local addresses start with FE00:/12.
C.Link-local addresses start with FF00::/10.
D.There is only one loopback address and it is ::1.
E.If a global address is assigned to an interface, then that is the only allowable address for the interface.

4.單項選擇題Users on the 192.168.1.0/24 network must access files located on the Server 1. What route could be configured on router R1 for file requests to reach the server()。

A.ip route 0.0.0.0 0.0.0.0 s0/0/0
B.ip route 0.0.0.0 0.0.0.0 209.165.200.226
C.ip route 209.165.200.0 255.255.255.0 192.168.1.250
D.ip route 192.168.1.0 255.255.255.0 209.165.100.250

5.單項選擇題Which command shows if an access list is assigned to an interface?()

A.show ip interface [interface] access-lists
B.show ip access-lists interface [interface]
C.show ip interface [interface]
D.show ip access-lists [interface]

最新試題

以下哪兩種介質可提供高達1Gb/s 的帶寬?()

題型:多項選擇題

請參見圖示。RouterB 已經過正確配置。RouterA 的以太網接口Fa0/0已使用如圖所示的命令進行配置。但是,從RouterA 的Fa0/0接口無法成功ping 通RouterB 的Fa0/0接口。應在RouterA 上采取什么措施來解決此問題?()

題型:單項選擇題

請參見圖示。主機A 正在訪問多臺服務器。結合使用什么端口號和地址即可唯一識別特定服務器上運行的特定進程?()

題型:單項選擇題

請參見圖示。主機B 嘗試與主機C 建立TCP/IP 會話。在嘗試期間,San Francisco 器由器的FastEthernet 接口fa0/1捕獲到一個幀。捕獲的幀中包含源IP 地址為10.10.1.2而目的IP 地址為10.31.1.20的數據包。捕獲該幀時,它的目的MAC 地址是什么?()

題型:單項選擇題

請參見圖示。主機X 和主機Y 與本地網絡的通信受到限制。此問題的原因是什么?()

題型:單項選擇題

請參見圖示。在網絡中,PC1向PC2發送了一條消息。PC2收到的幀如圖所示。該幀中的哪一信息確定了正確的目的應用程序?()

題型:單項選擇題

在Cisco IOS 設備中,啟動配置文件存儲于何處?()

題型:單項選擇題

請參見圖示。一臺路由器(其路由表如圖所示)收到發往192.168.1.4的數據包。路由器將如何處理該數據包?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲行枰嗌賯€邏輯地址范圍?()

題型:單項選擇題

請參見圖示。網絡中的所有設備均使用默認配置。此拓?fù)渲写嬖诙嗌賯€廣播域?()

題型:單項選擇題