Refer to the exhibit. Router RTA has been configured as a DHCP server for router RTC. On thebasis of the information that is provided， which statement about DHCP is true？（）
A.The VLAN1-POOL argument must be issued for the Fa0/1 interface on router RTA
B.Router RTA must be configured with the default-router 192.168.3.2 DHCP command.
C.The ip address dhcp interface configuration command must be issued for the Fa0/1 interface ofrouter RTA
D.The ip helper-address 192.168.1.2 interface configuration command must be issued for theFa0/1 interface on router RTA
E.Router RTC must be configured with the ip address dhcp global configuration command
F.The lease 200 DHCP configuration command would change the default DHCP lease time to48 hours on router RTA
您可能感興趣的試卷
你可能感興趣的試題
A.53（DNS）
B.69（TFTP）
C.515（LPR）
D.161（SNMP）
E.49（TACACS）
A.IP Helper is used to direct BOOTP clients to a BOOTP server
B.IP Helper is used to prevent the router form forwarding IP broadcasts
C.IP Helper is used to allow IPX clients to communicate with IP-based servers
D.IP Helper is used to accommodate compatibility routers using different IP routing protocols
E.None of the other alternatives apply
RIP and OSPF are configured on the routers as shown in the exhibit. R2 is configured with a two-way redistribution between RIP and OSPF domains. All routers can ping each other， but R1cannot see any of the OSPF routes in its routing table. What could the problem be？（）
A.OSPF and RIP use the same major network 172.16.0.0. Therefore， the keywordsubnets is notrequired to redistribute protocols into OSPF
B.Because OSPF has a longer mask for the same major network than RIP and because RIPversion 1 is being used， none of the routes learned from OSPF will be advertised into RIP
C.The metric for the OSPF routes that are redistributed into RIP is too low， a fact that preventsOSPF routes from being advertised into RIP
D.The process of redistribution of RIP into OSPF does not require any metric conversion， so thereis no need to define the metric using the default-metric command during the redistribution
Refer to the network shown below：
R1 and R2 belong to the RIP routing domain that includes the networks 10.20.0.0/16 and
10.21.0.0/16. R3 and R4 are performing two-way route redistribution between OSPF and RIP. Anetwork administrator has discovered that R2 is receiving OSPF routes for the networks
10.20.0.0/16 and 10.21.0.0/16 and a routing loop has occurred. Which action will correct thisproblem？（）
A.Set the OSPF default metric to 20
B.Apply an inbound ACL to the R2 serial interface
C.Configure distribute-lists on R3 and R4
D.Change the RIP administrative distance on R3 to 110
E.Change the OSPF administrative distance on R3 to 110
F.None of the other alternatives apply
Refer to the exhibit. The routing protocols EIGRP and OSPF have been configured as indicated inthe exhibit. Given the partial configuration of router R2， which network will be present in the routingtable of R4？（）
A.Network B
B.Network A and Network B
C.Network A
D.neither Network A nor Network B
最新試題
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
Which statement about PPPoA configuration is correct？（）
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Which three statements accurately describe IOS Firewall configurations？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
IPSec VPN is a widely-acknowledged solution for enterprise network. What are the four steps tosetup an IPsec VPN？（）