A.Disable post scan
B.Use SSH or SSL
C.Enable trust levels
D.Deny echo replies on all edge routers
您可能感興趣的試卷
你可能感興趣的試題
Network Topology Exhibit：
Configuration Exhibit：
NET（config）# access-list 112 deny icmp any any echo log
NET（config）# access-list 112 deny imp any any redirect log
NET（config）# access-list 112 deny icmp any any mask-request log
NET（config）# access-list 112 permit icmp any 10.1.1.0 0.0.0.255
NET（config）# interface Fa0/1
NET（config-if）# ip access-group 112 in
You work as a network administrator at networkTut.com， study the exhibit carefully. The
configuration has been applied to router NET to mitigate the threat of certain types of ICMPbasedattacks while allowing some ICMP traffic to the corporate LAN to work. However， the configurationis incorrect. On the basis of the information in the exhibit， which configuration option wouldcorrectly configure router NET？（）
A.The first three statements of ACL 112 should have permitted the ICMP traffic and the laststatement should deny the identified traffic
B.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.2.1.00.0.0.255"
C.The last statement of ACL 112 should have been "access-list 112permit icmp any 10.2.1.00.0.0.255"
D.ACL 112 should have been applied to interface Fa0/0 in an inbound direction
E.The last statement of ACL 112 should have been "access-list 112deny icmp any 10.1.1.00.0.0.255"
F.ACL 112 should have been applied to interface Fa0/1 in an outbound direction
G.None of the above
A.The dsl operating-mode auto command is required if the default mode has been changed
B.The ip mtu 1496 command must be applied on the dialer interface
C.The encapsulation ppp command is required
D.The ip mtu 1492 command must be applied on the dialer interface
As a network engineer， study the exhibit carefully. Router Net is unable to establish an ADSLconnection with its provider. Which action would correct this problem？（）
A.On the Dialer0 interface， add the pppoe enable command
B.On the Dialer0 Interface， add the ip mtu 1496 command
C.On the ATM0/0 interface， add the dialer pool-member 1 command
D.On the ATM0/0 interface， add the dialer pool-member 0 command
Router NetworkTut is configured as shown below：
Given the above configuration， which statement is true？（）
A.This device is configured as a PPPoE client
B.This device is configured as a PPPoA client
C.This device is configured as RFC 1483/2684bridge
D.This device is configured an an aggregation router
A.PPPoE with the 827 configured as a bridge
B.PPPoE with the 827 configured as the PPPoE client
C.PPPoA
D.RFC 1483 Bridged with the 827 configured as the PPPoE client
E.RFC 1482 Bridged with the 827 configured as a bridge
最新試題
IPSec VPN is a widely-acknowledged solution for enterprise network. Which three IPsec VPNstatements are true？（）
Drag the IPsec protocol description from the above to the correct protocol type on the below.（Notall descriptions will be used）Drag and Drop question， drag each item to its proper location.
Study the exhibit carefully. The Cisco IOS IPsec High Availability （IPsec HA） Enhancementsfeature provides an infrastructure for reliable and secure networks to provide transparent availability of the VPN gateways - that is， Cisco IOS Software-based routers. What are the twooptions that are used to provide High Availability IPsec？（）
Which two encapsulation methods require that an 827 ADSL router be configured with a PPPusername and CHAP password？（）
You need to configure a GRE tunnel on a IPSec router. When you are using the SDM to configurea GRE tunnel over IPsec， which two parameters are required when defining the tunnel interfaceinformation？（）
As a network technician， do you know what is a recommended practice for secure configurationmanagement？（）
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
Drag the protocols that are used to distribute MPLS labels from the above to the target area on thebelow.（Not all options will be used）
A new router was configured with the following commands：The configuration above was found on an Internet Service Provider’s （ISP） Multiprotocol LabelSwitching （MPLS） network. What is its purpose？（）
Drag and drop each function on the above to the hybrid fiber-coaxial architecture component that itdescribes on the below.