A.May have Ethernet as well as non-Ethernet interfaces
B.Traditionally used as a standalone device for inter-VLAN communication
C.Makes use of TCAMs
D.Uses subinterfaces to define trunks
E.Can use both Layer 2 and Layer 3 to make forwarding decisions
F.Allows the definition of Switched Virtual Interfaces（SVI）
您可能感興趣的試卷
你可能感興趣的試題
A.Use the ip nbar pdlm command to allow NBAR to reference a new PDLM in flash memory
B.If NBAR doesn’t recognize certain applications you must contact Cisco and ask them to emailyou a new PDLM for that application
C.Use the ip nbar port-map command to allow NBAR to recognize certain applications with anev/port number
D.The applications not being recognized can be rerouted to an NBAR collector， which has a morecomplete list of applications
E.Use the copy nbar flash： command to download a new PDLM file to flash
F.Use the ip nbar pdlm command to download a new NBAR reference file from the Cisco website
A.Routing loops
B.Misconfiguration of VPN end points
C.Overiapping IP address space
D.DMVPN
E.User profiles
F.MTU
Which of the following is a valid representation of the following IPv6 address：
2001：0000：0000：0abc：0000：0000：000a：000b？ Choose the answer with the least number of digits.（）
A.2001：0000：0：abc：0000：0000：a：b
B.2001：：abc：：a：b
C.2001：：abc：0：0：000a：000b
D.2001：：0abc：0000：0000：a：b
E.2001：0000：0000：abc：：a：b
F.2001：：abc：0：0：a：b
A.Quality of Service
B.Trunk configuration
C.Access lists
D.Routing protocol configuration
E.Power over Ethernet
F.DHCP configuration
A.Create an IPv4 tunnel and assign the tunnel IPv6 addresses
B.Create IPv4 interfaces on both ends of the network， and use either static routes or a routingprocess to direct IPv6 packets through those interfaces
C.IPv6 packets cannot be encapsulated with IPv4 headers because the addresses are notcompatible
D.Create IFV6 interfaces on both ends of the network， and use static routes to point the IPv4address to those interfaces
E.Use an IPv6 routing protocol like OSPFv3 and assign IPv4 packets to that process
F.Create an IPv4 tunnel and use the tunnel mode ipv6ip command
最新試題
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clickingthe numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible. To gain access to either thetopology or the SDK click on the button to left side of the screen that corresponds to the sectionyou wish to access. When you have finished viewing the topology the SDK you can return to yourquestions by clicking on the Questions button to the left.Which IPSec rule is used for the Olympia branch and what does it define？（）
Match the xDSL type on the above to the most appropriate implementation on the below.
Identify the recommended steps for worm attack mitigation by dragging and dropping them into thetarget area in the correct order.
Drag and drop question. The upper gives the MPLS functions， the bottom describes the planes.Drag the above items to the proper location at the below
cisco ios command to interface dialer 0
Which three statements accurately describe IOS Firewall configurations？（）
Drag and drop each management protocol on the above to the correct category on the below.
Drag each element of the Cisco IOS Firewall Feature Set from the above and drop onto itsdescription on the below.
Drag and drop the steps in the process for provisioning a cable modem to connect to a headendon the above to the below in the order defined by the DOCSIS standard.
This item contains several questions that you must answer. You can view these questions byclicking on the Questions button to the left. Changing questions can be accomplished by clicking the numbers to the left of each question. In order to complete the questions， you will need to referto the SDM and the topology， neither of which is currently visible.To gain access to either the topology or the SDK click on the button to left side of the screen thatcorresponds to the section you wish to access. When you have finished viewing the topology theSDK you can return to your questions by clicking on the Questions button to the left.Which defined peer IP address an local subnet belong to Crete？（）