The Cisco AutoQoS feature is being used throughout the Company VOIP network.
Which three statements about this feature are true？（）
A.The "mls qos" global configuration command must be entered before configuring AutoQoS.
B.CEF must be enabled.
C.The "no auto qos voip" command is used to disable Cisco AutoQos and revoke all configurations generated by Cisco AutoQos.
D.CDP must be enabled.
E.SNMP must be enabled.
您可能感興趣的試卷
你可能感興趣的試題
Refer to the exhibit.
What is the effect on the trust boundary of configuring the command mls qos trust cos on the switch port that is connected to the IP phone？（）
A.Effectively the trust boundary has been moved to the IP phone.
B.RTP will be used to negotiate aCoS value based upon bandwidth utilization on the link.
C.The switch is rewriting packets it receives from the IP phone and determining theCoS value.
D.The switch will no longer tag incoming voice packets and will trust the distribution layer switch to set theCoS.
E.The host is now establishing theCoS value and has effectively become the trust boundary.
Refer to the exhibit.
Which switch interface configuration command would automatically configure quality of service （QoS） for voice over IP （VoIP） within a QoS domain？ （）
A.switchport priority extend trust
B.mls qos trust
C.switchport priority extend cos 7
D.auto qos voip cisco-phone
Refer to the exhibit. A trunk link is connected between switch A_SW and switch D_SW. Based on the configuration shown in the exhibit，
how would the traffic coming from the switch A_SW be managed？（）
A.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames coming from the IP phone.
B.The trunk port Fa0/1 on switch A_SW will trust allCoS values on the frames received on the IP phone.
C.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames coming from port Fa0/1 on A_SW.
D.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the A_SW switch port Fa0/4.
E.The trunk port Fa0/1 on switch D_SW will trust allCoS values on the frames received on the IP phone port.
The Company network is displayed in the following topology exhibit：
Workstation 1 traffic is set for cos 5 and the switch CompanyA sends workstation 1 traffic to the switch CompanyB. However， not all of the traffic from Switch CompanyA is from workstation 1. Switch CompanyA configurations Switch CompanyB Configuration：
mlsqos mls qos
interfacefa0/1 interface fa0/1
switchportmode trunk switchport trunk mode
switchporttrunk encapsulation dot 1q switchport trunk encapsulation dot 1q
switchporttrunk native vlan 1 switchport trunk native vlan 1
Frames from Workstation 1 are given the rightful priority through Switch CompanyA， but Switch CompanyB doesn’t reciprocate， and treats Workstation 1 frames as if they have no precedence. Which of the following actions will prioritize traffic from Workstation 1？（）
A. Configure qos all command under Switch CompanyB fa0/1 interface.
B. Configure mls qos trust cos command under Switch CompanyB fa0/1 interface.
C. Configure mls qos trust cos 5 command under Switch CompanyB fa0/1 interface.
D. Configure qos cos 5 command under Switch CompanyB fa0/1 interface.
E. Configure mls qos trust cos command under Switch CompanyA fa0/1 interface.
F. Configure qos cos 5 command under Switch CompanyA fa0/1 interface.
VOIP is being implemented in the Company network and you need to assess the need for QoS.
Which of the following network problems would indicate a need to implement QoS features？（）
A.Mis-routed packets
B.Excess jitter
C.Delay of critical traffic
D.Packet loss due to congestion
E.Data link layer broadcast storms
F.FTP connections unsuccessful
最新試題
Refer to the exhibit. What command was issued on the Layer 3 switch Sw1 between Exhibit #1 and Exhibit #2？（）
If G1/0/1 on DS1 is shutdown， what will be the current priority value of the Vlan105’s group on DS1 ？（）
DS2 has not become the active device for Vlan103’s HSRP group even though all interfaces are active. As related to Vlan103’s HSRP group. What can be done to make the group function properly ？ （）
Refer to the exhibit. What does the command channel-group 1 mode desirable do？ （）
Which statement is correct about RSTP port roles？（）
Refer to the exhibit. Based on the output of the show spanning-tree command， which statement is true？ （）
Refer to the exhibit. Switch 15 is configured as the root switch for VLAN 10 but not for VLAN 20. If the STP configuration is correct， what will be true about Switch 15？（）
Refer to the exhibit. On the basis of the output of the show spanning-tree inconsistentports command， which statement about interfaces FastEthernet 0/1 and FastEthernet 0/2 is true？（）
What will occur when a nonedge switch port that is configured for Rapid Spanning Tree does not receive a BPDU from its neighbor for three consecutive hello time intervals？（）
Refer to the exhibit and the partial configuration of switch SW_A and SW_B. STP is configured on all switches in the network. SW_B receives this error message on the console port：00：06：34： %CDP-4-DUPLEX_MISMATCH： duplex mismatch discovered on FastEthernet0/5 （not half duplex）， with SW_A FastEthernet0/4 （half duplex） ， with TBA05071417（Cat6K-B） 0/4 （half duplex）. What would be the possible outcome of the problem？（）