A.to determine if there are more clients that are using the multicast stream
B.to limit the time that a client has to request an IGMP join to the controller multicast group
C.to determine if the multicast router is still alive and responding to multicast clients
D.to remove clients from the multicast group if the multicast traffic exceeds the allotted bandwidth allowed for multicast clients
您可能感興趣的試卷
你可能感興趣的試題
A.TSPEC IE
B.TSRS IE
C.WMM IE
D.TSM IE
A.Wireless client WMM UP classification is translated to a wired DSCP priority.
B.Wireless client 802.11p classification is translated to a wired DSCP priority.
C.Wireless client WMM UP classification is translated to a wired 802.1p CoS priority.
D.Wireless client 802.11p classification is translated to a wired 802.1p CoS priority.
A.Packet loss is less than one percent.
B.Signal strength at cell edge is approximately -67 dBm.
C.End-to-end delay is less than 200 ms.
D.Cell overlap between APs is 50 percent.
A.the codec used by the calling phone
B.approximate length of the call in minutes
C.MOS values throughout the duration of the call
D.802.11e access category overruns
E.co-channel interference percentage during the call
A.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC after AP1 issues an IGMP query.
B.Client issues an IGMP join after association with AP2, allowing AP2 to request a multicast stream from Cisco WLC independent of AP1 multicast member status.
C.Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, provided that another client has already joined that multicast.
D.Client resumes multicast after association with AP2, because multicast information is sent in mobility exchanges and AP2 is already a member of the multicast group, regardless if any other clients have already joined that multicast.
最新試題
Which two statements correctly describe a Cisco WLC configuration of Wireless > QoS > Profiles >Wired_QoS_Profiles for an implementation of DSCP or CoS deployment?（）
Which statement describes the call behavior of the Cisco Unified Wireless IP Phone 7921G when it roams from 802.11b to 802.11a?（）
Which two multicast modes are valid options for use with Ethernet bridging on a mesh AP?（）
Which keypad sequence will reset the Cisco Unified Wireless IP Phone 7921 to factory default?（）
An LWAPP encapsulated packet is being sent from the Cisco WLC v5.2 to the AP for a wireless WMM client. Can the LWAPP frame be altered to change the resulting final WMM queue for transmission on an 802.11 client?（）
Which wireless LAN statistics are reported from the Cisco Unified Wireless IP Phone 7921G via a directly connected web browser?（）
What is the recommended minimum speed at the edge of the cells in an 802.11g network for a good Cisco VoWLAN deployment?（）
What is the Cisco recommended setting for the Cisco Unified Wireless Network WLC Voice Call Admission Control Max RF Bandwidth to support the Cisco Unified Wireless IP Phone 7921G?（）
Which statement describes the WLCv5.2 delivery of a multicast packet from a wired PC source on VLAN_X to a respective wireless client using SSID_X, using a WLAN controller enabled for multicast?（）
Which two pieces of information does the Cisco WLC v5.2 client monitor feature provide about a VoWLAN client?（）