A.controller name
B.outdoor area
C.floor area
D.networks
E.mac address
F.ip address
您可能感興趣的試卷
你可能感興趣的試題
A.router （config）# wlccp authentication-server infrastructure eap group_1
B.router （config）# wlccp authentication-server infrastructure eap-fast group_1
C.router （config）# wlccp authentication-server client eap-fast group_1
D.router （config）# wlccp authentication-server client eap group_1
A.registration error
B.authentication failures threshold
C.http disabled
D.telnet disabled
A.administrators
B.system monitoring
C.network operator
D.power users
E.admin
F.users’ assistant
When configuring vlans on an autonomous access point.
What must be configured on the connected switchport？（）
A.802.1q trunking
B.vtp trunking
C.isl trunking
D.dpt trunking
There are 30 managed access points on the wlse. a radio scan is started but fails. Upon
inspection of the device list in the reports tab， you notice a red indicator on the wds access point. upon inspection of the wds access point through its guid， it is discovered that the security keys are not set up between the wds access point and the wlse.
Which of the following is mis configured？（）
A.snmp communities
B.telnet/ssh user/password
C.wlccp credentials
D.http user/password
最新試題
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
On a Cisco Aironet 1240AG Series standalone access point， the radio LED is dark blue and blinking，but the status LED and Ethernet LED are both off.What does this indicate？（）
You are using ADU and are authenticated and associated to an access point. However， you are unable to obtain an IP address.Which of these has caused this problem？（）
Which of the following commands on the wireless interface of a Cisco 3845 Integrated Service Router allows the SSID to broadcast？（）
A client roams from H-REAP AP1 to H-REAP AP2. The client is unable to associate to H-REAP AP2.H-REAP AP2 has six other clients associated to it， which continue to pass traffic.What has causedthis problem？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）
When configuring Cisco Secure ACS to support wireless EAP authentication， which device must be configured as a AAA client？（）
A mobility group is created by a Cisco WLCM and 4402 Series Wireless LAN Controller. A client thatis anchored on the Cisco WLCM roams to an access point on the 4402 controller. You then run adebug command on the 4402 controller.Which message would best describe the establishment ofthe tunnel from the foreign controller’s perspective？（）
You are charges with implementing a secure wireless installation which will provide Internet accessto client devices but will not allow communications between wireless clients.In addition to implementing PSPF or peer-to-peer blocking on the wireless side，which of the following actionsshould you perform on the wired infrastructure？（）
An REAP was supporting 16 WLANs， but now it only supports one.What happened to cause the change？（）