A.voip
B.rfid tags
C.data collection
D.802.11b and g clients
您可能感興趣的試卷
你可能感興趣的試題
The ios of a north american cisco aironet 1230 series access point has become corrupt，
necessitating the need for a tftp firmware reload.
Before you press and hold the mode button，what must the file be named in order for the reload to occur？（）
A.c1200-k9w7-tar.default
B.c1200-k9w7-tar.boot
C.c1200-k9w7-tar.123-7.ja1.tar
D.c1200-k9w7-tar.recover
lightweight access point has been connected to a catalyst 3550 24-pwr switch， and on power-up the access point fails.
What is the problem with the switch？（）
A.the power supply has inadequate wattage.
B.power is incorrectly configured on the port.
C.it does not support 802.3af poe.
D.power is not enabled on the port.
Two access points running the core feature set are connected to the same switch and are
providing guest services. if pspf is enabled.
What must be enabled on the switch to prevent clients from seeing one another’s data？（）
A.port-based radius
B.802.1q trunking
C.inline power
D.protected port
A.startup
B.site survey mode
C.lost connection to the controller
D.duplicate ip address
Last december you erected a bridge link between two buildings on your campus. it is now april and the foliage in the trees is full， and the bridge link will no longer maintain connectivity.
Which action will most likely solve the problem？（）
A.change the channel selection.
B.install higher gain antennas.
C.raise the antennas.
D.increase transmitter power.
最新試題
You are configuring an RF group of controllers that coordinate Radio Resource Management calculations.What is the maximum number of WLAN controllers that you can add？（）
What is the maximum number of wireless controllers that the highest-end Cisco WCS server canmanage？（）
You are troubleshooting a problem with a Cisco 7920 wireless IP phone that is causing the phoneto drop calls. The problem appears to be roaming bandwidth issue. In order to verify what kind ofissue it is， you decide to increase the bandwidth reserve for roaming on the WLAN controller tomaximum.What level do you set the bandwidth to？（）
If it is properly deployed， a controller-based access point is capable of monitoring all VLANs on anetwork when you select which of the following modes from the AP Mode drop-down menu onthe controller？（）
Clients using Cisco-LEAP and EAP-FAST authentication are having no problems logging on to thewireless network， but clients using PEAP are failing to log on.Which situation would result in thistype of problem？（）
You want to dynamically assign users to an 802.1Q VLAN as a result of their authentication. Inorder to accomplish this.Which two IETF RADIUS attributes should you configure on the CiscoSecure ACS？ （）
You have a very few Cisco 7920 wireless IP phones on your network， but lots of wireless laptops.You want to increase the bandwidth available for the laptops by decreasing the bandwidth reserved for the Cisco 7920 phones.What is the lowest percentage of voice-allocated bandwidthyou can select on the WLAN controller？（）
On a WLAN controller， what is the default roaming bandwidth percentage reserved for voice clients？（）
You are troubleshooting a one-way call problem with a Cisco 7920 wireless IP phone on a standalone WLAN.What may cause this problem？（）
You have just finished aligning a Cisco Aironet 1400 Series Wireless Bridge link using installationmode. When you set the link back to operational mode you loose association to the root bridge.Which action will correct the problem？（）