A.lower than the center of gravity
B.at the same height as the center of gravity
C.higher than the baseline
D.on the longitudinal centerline
您可能感興趣的試卷
你可能感興趣的試題
A.free surface effects are reduced due to pocketing
B.KG is reduced as the vessel seeks the angle of loll
C.effective beam is increased causing BM to increase
D.underwater volume of the hull is increased
A.vertically above the center of buoyancy
B.vertically above the center of gravity
C.at the intersection of the upright vertical centerline and the line of action of the buoyant force
D.at the geometric center of the underwater volume
A.The foot/tons needed to trim the vessel by 1 inch
B.The foot/tons needed to trim the vessel by 1 foot
C.The moments needed to trim the vessel by 1 centimeter
D.The amount of vessel will trim when loading 100 tons 100 feet from the tipping Center
A.The metacenter does not remain in the same position for large angles of inclination
B.The center of gravity shifts due to inclination
C.The center of gravity shifts above the metacenter as the vessel is inclined
D.The mean draft will change as the vessel is inclined
A.list
B.heel
C.trim
D.flotation
最新試題
A load line of a ship is assigned by().
All of the following can be determined by use of a stabilogauge EXCEPT().
For small angles of inclination,if the KG were equal to the KM,then the vessel would have().
At all angles of inclination,the metacenter is().
Which of the following is the reason that the metacentric height is a valid measure of only the initial stabilit?().
()we have worked out the loading plan,we shall start doing more revision work.
Forces within a vessel have caused a difference between the starboard and port drafts. This difference is called().
A slow and easy motion of a vessel in a seaway is an indication of a().
A vessel with a large GM will().
A ship with the TCG off the longitudinal centerline inclines to an angle of().