單項選擇題

What will happen after redistributing other routing protocol routes into OSPF? ()

A. miss the metric option in the redistribute command.
B. misconfigure the metric- type option in t he redistribute command to type - 1.
C. miss the subnet option in the redistribute command.
D. miss the tag option in the redistribute command.


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題

Based on the show ip route isis output on R1, which statement is true? ()

A. The i su 10.1.0.0/23 route is a suppressed route.
B. The i su 10.1. 0.0/23 route is a summary route.
C. The i su 10.1.0.0/23 route is an IS - IS external route.
D. The R1 IS - IS router is an ASBR.
E. The R1 IS - IS router is an ABR that belongs to multiple IS - IS areas.
F. The R1 IS - IS router is performing route aggregation  and is suppressing the more specific 10.1.0.0/23 prefix.

2.單項選擇題

Given the network diagram, which routers currently make up the IS - IS  backbone?()

A. R3,R4,R6
B. R2,R3,R6,R7
C. R1 through R8
D. R3,R4,R5,R6
E. R2,R3,R4,R6,R7

3.多項選擇題IS - IS is often considered an alternative to OSPF in the IP world. Which two statements identify similarities between IS -IS and OSPF?()

A. support for designated intermediate systems and backup designated intermediate systems
B. support for multip le areas per router
C. support for classless routing
D. support for address summarization between areas
E. support for both DIS adjacencies and neighbor adjacencies

4.單項選擇題

According to the following output, can you tell me which command can redistribute IGRP into EIGRP?()

 

A. Under t he router eigrp mode add redistribute igrp 123 subnets
B. Under the router igrp mode add redistribute eigrp 123
C. None, EIGRP and IGRP are automatically redistributed in this instance.
D. Under the router eigrp mode add redistribute igrp 123

5.單項選擇題

A policy needs to be implemented on Router B so that any traffic sourced from 172.16.10.0/24 will be forwarded to Router C. Which configuration on Router B will achieve the desired effect?()

A.access - list 1 permit 172.16.10.0 0.0.0.255  !  interface e0  ip policy route - map policy  !  route - map policy permit 10  match ip address 1  set ip next - hop 1 72.16.14.4
B.access - list 1 permit 172.16.10.0 0.0.0.255  !  interface s0  ip policy route - map policy  !  route - map policy permit 10  match ip address 1  set ip next - hop 172.16.12.3
C.access - list 1 permit 172.16.10.0 0.0.0.255  !  interface e0  ip polic y route - map policy  !  route - map policy permit 10  match ip address 1  set ip next - hop 172.16.12.2
D.access -list 1 deny 172.16.10.0 0.0.0.255  !  interface s0  ip policy route - map policy  !  route - map policy permit 10  match ip address 1  set ip next - hop 172.16.12.2

最新試題

An engineer is reviewing another engineer's sample configuration for a GRE tunnel used to pass IPv6 traffiC. The tunnel ha s not yet been configured on the router.Which of the following commands is not required for the configuration to pass IPv6 traffic?()

題型:單項選擇題

The following configura tion exists on a router on one end of an IPv6 tunnel. Which type of tunnel is created by this configuration?()interface loopback 1ip address 1.1.1.1 255.255.255.255interface tunnel 2ipv6 address 2000::1::/64tunnel source loopback 1tunnel destina tion 2.2.2.2tunnel mode ipv6ipipv6 eigrp 1

題型:單項選擇題

The following configuration exists on a router on one end of an IPv6 tunnel. Although the configuration added so far is correct, the configuration is incomplete. Which type of tunnel is most likely to be intended by the network engineer?()interface loopback 1ip address 192.168.1.1 255.255.255.255interface tunnel 2ipv6 address 2002:C0A8:10 1::1/64tunnel source loopback 1

題型:單項選擇題

Which of the following  answers lists a multicast IPv6 address?()

題型:單項選擇題

Router R1 currently has no configuration related to IPv6 or IPv4. The following configuration exists in a planning document, intended to be used to copy/paste into Router R1 to enable RIPng and IPv6 on interfaces F0/0 and S0/0/0. No other related configuration exists. Which of the following is true about RIPng on R1 after this configuration has been pasted into R1?()ipv6 unicast- routinginterface f0/0ipv6 rip one enableipv6 address 2000::1/64interface s0/0/0ipv6 address 2001::/64 eui - 64ipv6 rip one enable

題型:單項選擇題

The following output occurs on Router R1 , which runs both EIGRP for IPv6 and OSPFv3, with redistribution from EIGRP into OSPF configured with the redistribute eigrp 1 metric 25 command. Interface S0/0/1 has been enabled for EIGRP ASN 1. Which of the following should be true of redistribution in  this case?()D 2000::/64 [90/1422516]via FE80::213:19FF:FE7B:5026, Serial0/0/1C 2000:0:0:1::/64 [0/0]via Serial0/0/1, directly connectedL 2000::1:213:19FF:FE7B:5004/128 [0/0]via Serial0/0/1, receive

題型:單項選擇題

Router R1, a branch router, connects to the Internet using DSL. Some traffic flows through a GRE and IPsec tunnel, over the DSL connection, and into the core of an Enterprise network. The branch also allows local hosts to communicate directly with public sites in th e Internet over this same DSL connection.Which of the following answers defines how the branch NAT config avoids performing NAT for the Enterprise directed traffic but does perform NAT for the Internet - directed traffic?()

題型:單項選擇題

Router R1 has the following configuration. Assuming R1's F0/0 interface has a MAC address of 0200.0011.1111, what IPv6 addresses will R1 list for interface F0/0 in the output of the show ipv6 interface brief command?()interface f0/0ipv6 address 2345:0:0:8::1/64

題型:多項選擇題

Which of the following answers lists either a protocol or function that can be used by a host to dynamically learn its own IPv6 address?()

題型:多項選擇題

An ISP has assigned prefix 3000:1234:5678::/48 to Company1. Which of the following terms would typically be used to describe this type of public IPv6 prefix?()

題型:單項選擇題