單項選擇題Scrambling of SONET signals is done to ().

A. prevent the leakage of external fiber emissions
B. provide the optical network with the highest level of security possible
C. assure an even distribution of 1's and 0's for extended transmitter life
D. assure an adequate number of transitions for clock recovery at the receiver
E. prevent the receiver from assuming AIS inadvertently when all 0's are received


您可能感興趣的試卷

你可能感興趣的試題

1.單項選擇題A Channel ID mismatch occurs when ().

A. fibers are terminated incorrectly on a node
B. the channel number in the received K1 byte is not identical to the channel number transmitted in the K2 byte
C. the channel number in the received C1 byte is not identical to the channel number transmitted in the C2 byte
D. the channel number in the received C2 byte is not identical to the channel number transmitted in the C1 byte
E. the channel number in the received K2 byte is not identical to the channel number transmitted in the K1 byte

3.單項選擇題Which timing mode is most appropriate for an ONS 15454 that has lost its BITS-1 and optical references?()

A.line timing
B.loop timing
C.internal timing
D.through timing
E.external timing

5.單項選擇題A customer has 2 DS1s to add between adjacent nodes in a UPSR ring. What type of circuit should you recommend?()

A. VT circuits
B. STS circuits
C. VT tunnel circuits
D. 1:1 protection circuits
E. 1:N protection circuits

最新試題

The dispersion of a non-zero dispersion shifted fiber is 6 ps/nm*km at 1550 nm and 10 ps/nm*km at 1610 nm. What is the minimum dispersion compensation required if an L-Band DWDM signal travels through 200 km of fiber and has a dispersion tolerance of 1800 ps/nm?()

題型:單項選擇題

Click the Exhibit button. When designing a DWDM system with multiple amplified spans, a pre-amp is needed at Site B to (). (Choose three.)

題型:多項選擇題

Which device creates an OEO conversion?()

題型:單項選擇題

The ONS 15216 is a 32-channel system. The ONS 15216 OADMs are capable of adding and dropping one, two, or four channels. How are the OADMs provisioned to add and drop specific channels?()

題型:單項選擇題

Scrambling of SONET signals is done to ().

題型:單項選擇題

What is the phenomenon called where different wavelengths of light travel at different speeds?()

題型:單項選擇題

What is an advantage of an externally modulated laser over a directly modulated laser?()

題型:單項選擇題

In order to avoid misconnections due to a failed node in a Bidirectional Line Switched Ring (BLSR), Alarm Indication Signals (AISs) are sent on every channel normally terminating in that node. What is the name of this process?()

題型:單項選擇題

What are three relevant design considerations when using the 15216 EDFA? ()(Choose three.)

題型:多項選擇題

UPSR protection switching is initiated by (), while BLSR is initiated by ().

題型:單項選擇題