A.DUS
B.line timing
C.loop timing
D.internal timing
E.through timing
您可能感興趣的試卷
你可能感興趣的試題
A. ESF
B. PRS
C. DUS
D. SMC
E. B8ZS
A. J0 errors detected in a specified interval
B. errors detected in a given Errored Second (ES)
C. errors detected in a given Severely Errored Second (SES)
D. errors the encryption algorithm detects in a specified interval
E. Bit Interleaved Parity (BIP) errors detected in a specified interval
A. prevent the leakage of external fiber emissions
B. provide the optical network with the highest level of security possible
C. assure an even distribution of 1's and 0's for extended transmitter life
D. assure an adequate number of transitions for clock recovery at the receiver
E. prevent the receiver from assuming AIS inadvertently when all 0's are received
A. fibers are terminated incorrectly on a node
B. the channel number in the received K1 byte is not identical to the channel number transmitted in the K2 byte
C. the channel number in the received C1 byte is not identical to the channel number transmitted in the C2 byte
D. the channel number in the received C2 byte is not identical to the channel number transmitted in the C1 byte
E. the channel number in the received K2 byte is not identical to the channel number transmitted in the K1 byte
A.255
B.512
C.1024
D.4096
最新試題
Click the Exhibit button. Which type of multiplexer is shown in the exhibit?（）
Click the Exhibit button. What is the maximum allowable loss budget between the ONS 15216 Mux (left side) composite output and the ONS 15216 Demux (right side) composite input, with the optical values given in the exhibit? （）(Assume the worst case loss of 4.5 dB for 15216 200 GHz Mux/Demux and ignore power penalties or extra margin.)
In order to avoid misconnections due to a failed node in a Bidirectional Line Switched Ring (BLSR), Alarm Indication Signals (AISs) are sent on every channel normally terminating in that node. What is the name of this process?（）
How is UPSR and BLSR traffic rerouted during a protection switch when a complete fiber cable cut occurs?（）
A Channel ID mismatch occurs when （）.
If node 2 is accepting line timing from node 1, node 2 will send （）to node 1 as its SSM message.
Why are the 1300 nm and 1550 nm regions of the fiber spectrum primarily used for optical communications?（）
UPSR protection switching is initiated by （）, while BLSR is initiated by （）.
If the dispersion of a given fiber is 17ps/nm*km at 1550 nm and zero at 1310 nm, then what is the accumulated dispersion of an ITU wavelength after it travels 200 km?（）
Which is a legitimate bandwidth matched pair?（）