A.ISM 2.4 GHz
B.ISM 900 MHz
C.ISM 5 GHz
D.public safety 4.9 GHz
E.GSM 1.9 GHz
您可能感興趣的試卷
你可能感興趣的試題
A.data/coverage
B.location with Monitor Mode access points
C.demand
D.high density
A.100 mW, 24 Mb/s
B.100 mW, 18 Mb/s
C.25 mW, 18 Mb/s
D.3.2 mW, 54 Mb/s
A.In a multifloor building, the access point layout from the survey of one floor can be directly applied to the remaining floors
B.Access points can be installed in the same place on every floor, without worrying about co-channelinterference
C.You can survey with a Cisco AIR-ANT5959 in a plenum environment
D.Identify all hazardous and restricted areas that might require extra or special survey and installationwork
A.Active mode does not require the client to be specifically confgured
B.Passive mode can survey more than one access point at a time
C.Active mode yields signal-quality information such as packet retries and lost packets
D.Active mode requires more time to survey but yields more information results than passive mode does
A.20 percent cell overlap
B.four access points detecting a client at -76 dBm or better
C.10 percent cell overlap
D.three access points detecting a client at -75 dBm or better
最新試題
The Cisco Aironet 1140 Series Access Point draws 12.95 W at the power source. However, whenusing a long Ethernet cable, the device can draw up to how much additional wattage?()
Cisco recommends a decibel referenced to 1 milliwatt signal level for the coverage cell edge at thepredetermined data rate that is needed to support the VoWLAN device and call capacityrequirements. What is that signal level value for Cisco Unified Wireless IP Phones 7920, 7921G, and7925G?()
How is attenuation measured?()
When planning for voice deployments with the Cisco Unified Wireless IP Phone 7921G handset in amultifloor building with a WLAN that operates at an 11 MB/s data rate, how many decibelsreferenced to 1 milliwatt of same-channel separation are recommended between floors?()
Which three device types are identified by Cisco Spectrum Expert Wi-Fi finding an Avg PulseDuration parameter?()
Which format can NOT be imported into Cisco WCS Planning Tool?()
Which three items does the Cisco WCS Planning Tool Generate Proposal Report provide?()
For an active Cisco Unified Wireless IP Phone 7921G 5 GHz site survey, what are the mostappropriate client test settings to use with the AirMagnet site survey tool?()
Which three colors are used in the Cisco WCS v5.2 Voice Readiness Tool?()
By how much is a signal’s strength reduced when the signal passes through an object thatintroduces 3 dB of attenuation?()